k/N OIL FILTER?
#1
k/N OIL FILTER?
Getting ready to go on a short trip ,had about 4K on the oil so i just changed my oil and came across a k&n oil filter, was comparing it to the fram i had PH3976A and noticed that the fram has 6 3/8" holes on top while the K&n filter has 8 which 7 or about 1/4" or so and 1 was a little bit larger also the inner screen looked somewhat like a cheese grader. guess i will find out how my truck does cause it is on the truck now. Just wondering if anyone has used them a bit pricey? OH the filter was K&N perf.gold HP-4003. Thanks
#2
#6
The following users liked this post:
millarjk (06-25-2009)
#7
Most people buy a K&N because it got that 1" nut welded on the bottom... Big deal...
So far every oil change I never hand to use a oil filter wrench or other tool to remove my filter. I can twist it off by hand every time. thread the filter till it makes contact. On the rear side of the filter make a scratch mark or similar. Now twits it 3/4 of a turn the mark will face the passenger side! Your done...
So far every oil change I never hand to use a oil filter wrench or other tool to remove my filter. I can twist it off by hand every time. thread the filter till it makes contact. On the rear side of the filter make a scratch mark or similar. Now twits it 3/4 of a turn the mark will face the passenger side! Your done...
The following users liked this post:
millarjk (06-25-2009)
#8
#9
#10