radiator swap suggestions for a 2001 7.3 psd
 

I got a hole in my radiator, big enough my patch job wouldn't hold. I don't really want to spend the $800 for the aluminum radiator for my 2001 7.3 psd. I was considering finding a few parting semis and taking some measurments. I had the idea of removing my account condenser and system, placing the larger semi intercooler where my condenser was to help separate the rad and intercooler. I know it'll probably be a pain in the ass and could turn out expensive, but I'd rather pay for something unique and effective vs what everyone else has. Any suggestions or is my idea not as good as I thought? Also I've now removed my fan clutch and plan on doing electric fans on a switch so I can kill them when want my power for launching.

Look up mishimoto, they might have one for the SD.

I've looked at that one. I may go that route if I can't figure something out. I found a parting semi with a radiator that I could fit with modification to my support and reducers to size down the hose to fit my psd hoses. I did the measurments and if I remove the ac condenser I can fit the intercooler from the semi too.

I also found a parting '08 that I'm going to go check out. See if I can use the rad and intercooler from that possibly.