550 to 650 hp
 

hi im new to thissite wondering wat turbo injectors etc do i need to get around 500 hp or more out of my 7.3l daily driver want to truck pull once and a while.

or do i have to do internal work to make that much hp

500 is fairly safe but 650 is getting up there in the HP levels of the stock rods. There is a ton of mods to make 500+ especially if you want to pull.

The injectors will need to be at least 250/200s

The turbo depends on how much you want to spend but around a 70mm is what you will need.

ok i was thinking about the gtp38r is that a good one for big injectors and would i need to get a new hpop to run that much hp

A 38r isn't enough. That's good for maybe 500. Its been known to put down more but that's pushing it. I wouldn't rub one if I was going for more then about 450.

Yes you will need an hpop, fuel system, head studs, push rids, valve springs, chip, transmission and more I'm forgetting

ok so wat turbo do u recommend and cost doesnt matter and wat fuel system like gph would i need for the 300/200 injectors and wat kind of hpop do u recomend sorry for all questions lol

I'm running an S468, but there are a lot of options out there. Fuel system would probably be irates competition kit.
I run terminator engineering twin pump setup

is the s468 streeetable and wat size injectors wats biggest ones for s468 and can still drive truck on street want to roll coal

If you roll coal I will stop right here and be sorry I ever gave you any advise

haha y do i need push rods and valve spring is tghat so it will turn more rpms