2002 Cummins 24V Valve Adjustment Video
Well my truck has over 100,000 miles on it , and the valves have never been adjusted ... ever! so i called up Kenny and asked him if he had a chance if he would adjust my valves for me and if it was OK if i video taped it. He said sure so a Big Thanks to Ken McCabe !
|
this just in :U:
|
nice man
|
Kind of like my write up just with video... :U:
|
nice video it will help:pca1:
|
Nice video.:U:
|
How much does Kenny charge to do this, have about 125k miles on mine, and they haven't be checked as far as I know. Thanks
|
Just to confirm, 0.010" and 0.020" cold, 0.008" and 0.0016" "hot"??? In all my years of Heavy Duty Mechanics have I every adjusted valve lash while an engine is "hot". Just seem to me that a push tube would lengthen more than 0.002"-0.004" with thermal expansion. Not saying it's wrong by any means, just different than anything I have heard or seen.
|
I think you will be fine adjusting it 10 and 20...
|
Nice video. Thanks DM. :U:
|
Give Kenny a Call 1-740-342-5007
|
:U:
|
last bump
|
valve adj. vid
Thanks so much in the informative video
|
what exactly does adjusting the valves do
|
Dieselminded:
Thanks for the video. I heard about adjusting the intake as follows: "remove oil blowby, align line above nut with line on case above puts #1 at TDC check/adjust 1,2,4 intake 360 crank rotation puts #6 at TDC check/adjust 3,5,6 intake" I did not hear anything about adjusting the exhaust? is it #1 at TDC check/adjust 1,2,4 intake, check 3,5,6 exhaust 360 crank rotation puts #6 at TDC check/adjust 3,5,6 intake, 1,2,4 exhaust? Dog: adjusting the valves gets them opening and closing at the right time, helps power/efficiency. |
All times are GMT -5. The time now is 06:25 AM. |
© 2024 MH Sub I, LLC dba Internet Brands