2002 Cummins 24V Valve Adjustment Video
#1
10-26-2009, 02:43 PM
2002 Cummins 24V Valve Adjustment Video
Well my truck has over 100,000 miles on it , and the valves have never been adjusted ... ever! so i called up Kenny and asked him if he had a chance if he would adjust my valves for me and if it was OK if i video taped it. He said sure so a Big Thanks to Ken McCabe !
Last edited by DB Admin; 10-27-2009 at 02:50 PM.
The following 7 users liked this post by DB Admin:
24vmatt (12-02-2010),
biged681985 (10-27-2009),
dieseldocter16 (10-27-2009),
Elimin8r (02-12-2012),
garibaldi929 (12-02-2010),
and 2 others liked this post.
#2
10-27-2009, 02:52 PM
#8
10-27-2009, 10:35 PM
Just to confirm, 0.010" and 0.020" cold, 0.008" and 0.0016" "hot"??? In all my years of Heavy Duty Mechanics have I every adjusted valve lash while an engine is "hot". Just seem to me that a push tube would lengthen more than 0.002"-0.004" with thermal expansion. Not saying it's wrong by any means, just different than anything I have heard or seen.
