Exhaust hangers
 

Anyone know where to get some 4" hangers that will fit my 4" pipe and go in the stock location right in front of where my cat converter used to be? And the one that used to be in front of the muffler as well. The one in the middle had a little step up and the ones by the cat had a 90* in them.

I hung my exhaust all redneck style and now I just noticed my downpipe is touching my uppipe because of the way it's hanging. :argh: Time to do it right.

my idea it aint really the right way but i would just say get some small steel round bar and bend it so it'll fit into the stock locations and also bend it around the bottom of the exhaust and just weld it there.
thats just how i did mine:w2:

Thats how most muffler shops will do it, and how most of mine is done.

But that being said, you should be able to go to a big rig shop and get them. 4" is a pretty typical size for those things.

If i had a bender and knew how to weld, that might be easy.... Lol.

I was hoping somebody would sell the hangers that you might find in an exhaust kit.

Maybe I should just take it down to an exhaust shop and have them weld two hangers for me?

Thats what I would do, for $40 bucks or so... easy cheesy.

Thanks guys.