Stage 1 injector rebuild from rosewood
 

I just bought a 1995 f250 with 230k on it for 3500 bucks. It's been sitting for about 5 years as the owner bought a new truck 5 years back. It hasn't been ran much in those dive years. The guy is the original owner. It's a 5 speed 4x4 out of Texas. It seemed a little sluggish when I test drove it. I figured maybe bad fuel and oil so I will be doing a system drain and change. But I was reading about rebuilding the injectors well I have the lines off. I was wondering if having rosewood rebuild them to stage ones was actually a deal or if it is to good to be true. Would it be a mistake or should I just plan on getting brand new ones? I don't have the money for new ones right now thats why I am asking about the rosewood budget build stage ones.thanks alot any feed back would be great!

Jim does nice work. id go 160 80's though

rosewood builds a quality injector but i might also step up to a stage 2 but if your just wanting a little bump in power the stage 1 is nice.

I plan on putting a chip and intake along with a 3 inch down pipe and exhaust on it. would i see gains from stage ones with that? And i know a guy with the identical truck that totaled it and has a tc with wildman tunes, would i be able to take it off his and run it in mine without remapping it or resetting it?

if its the same PCM code then yes

should be 4bank tuning so if it came out of a 94-97 with the same transmission then it should work! compare dpc codes on the PCM in the 2 trucks and if the DPC code matches it should work.