Turning Up A 12 Valve
Ok, ive searched though here figuring id find a thread on this but couldnt find one.
A buddy just bought a '98 12v and he wants to turn it up. I would like to find detailed instructions on how to turn up a p-pump. From turning the starwheel to grinding the fuel plate, everything. Pics would be great too. Thanks in advance. |
hmmmmm there's too much to type.... i can walk you through it over the fone.... it's simpler said than typed...... i can get you a nice chunk for free..... pm me if'n noone else post up for my number....
|
When I ground my plate I used a 90* air powered die grinder with a cone shaped carbide bit. After I was done I used a wire wheel and sand paper to smooth it out perfectly. Alot of guys just use a grinding wheel. Use the chart above and make what you want. a 10 or 100 seem to be the most popular.
|
go 0 or go home.....lol get a pyro first.....
|
He wants to go all out. If he needs to buy a turbo to keep it cool he will. As for now, he wants fuel and lots of it.
|
Originally Posted by Benjamin
(Post 91404)
go 0 or go home.....lol get a pyro first.....
Wyo, Get him to pinpoint a number first. 400, 500, 900? It's easier to tell you how to get there if we know the destination. |
just take that plate out and through it away , thats about all the way u can go, some say its not good on the pump but wife had a 97 i had it out for 40k and buddy who bought it still has it out 2 years later:c:
|
Originally Posted by TEXASPOWER
(Post 91462)
just take that plate out and through it away , thats about all the way u can go, some say its not good on the pump but wife had a 97 i had it out for 40k and buddy who bought it still has it out 2 years later:c:
|
Thanks guys, we got her turned up, he just wanted to slide the plate up all the way for now. Way better power, barely any smoke. We'll probably be grinding the plate soon because he has the bug now lol.
|
All times are GMT -5. The time now is 07:24 PM. |
© 2024 MH Sub I, LLC dba Internet Brands