Tork Tek Overflow Valve Install
8 Attachment(s)
Tools needed
19mm and a 14mm open end box end wrench time 30 mins Here is the location of the OFV Attachment 43460 Use the 14mm wrench and remove the plug that holds the spring in Attachment 43461 Use the 19mm wrench and remove the OFV from inside the pump Attachment 43462 Carefully lift the OFV and return line above the head dont pick up to high you can kink the line Attachment 43463 Now remove the OFV Attachment 43464 Here is the new Tork Tek 070hp Overflow valve Attachment 43465 Make sure you replace the sealing washers Attachment 43466 Push line back to the hole and start to tread the OFV back in by hand Attachment 43467 |
1 Attachment(s)
Now this is the job completed
Attachment 43459 This is my fuel pressure now after install http://i1020.photobucket.com/albums/...ins96/pics.jpg Hope this is informative:c: |
All times are GMT -5. The time now is 05:46 AM. |
© 2024 MH Sub I, LLC dba Internet Brands