thank you sir! you've given me hell of a good place to start!:rocking:
|
no problem let us know if you run into anything else
|
any lift suggestions? I want about 2 to 4 inches of lift, cost effective of course!:tu:
|
ide have to eye your truck but body lifts are always the cheapest at around $100
|
a 2 inch body lift will help with putting the turbo on.
and as for he turbo kit, MANIFOLDS ARE NOT NEEDED! intake or exhaust. |
Body lifts are gross, if your Gunna do it save up and spend money on 4" lift kit
|
X2 on the body lift, makes everything so easy. When i had my 6.9 a minor timing bump really helped out, and a 4k governor spring out of a GM 6.2, factory is ballanced for 4500 and some bus aplications run north of 4k. Also, while pulling, if it gets hot, drop down a gear, the idi's love rpms. It will keep it cooler running tight to the limiter than trying to lug it around.
|
im really not happy with my banks kit any other substitutes I might be able to use
|
Get the turbo first along with gauges to make sure you don't melt stuff do a good search for R&D IDI PERFORMANCE. thier injectors and pumps are very high quality and fair price. Get the sticks and the 90cc pump. Then if you have a couple hundred left go to coolingmist.com and get a meth kit. Way cheaper and better than snow performance. Those mods will blow you mind all for around 1200 bucks. Good luck sir
P.S. head studs(ARP) are always a good idea only 200ish more |
All times are GMT -5. The time now is 02:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands