more power from the 6.7
 

i have a 2008 dodge 2500 with a smarty programmer right now i was wondweing what the next step in power would be... im stuck between the h&s black maxx the edge or even going to injectors... does anyone know which chip will work best with the smarty for power and i would also like to see a little more smoke seeing as i have to floor it now just to see a little puff... thanks:humm:

well i think you'll only be able to run the edge being as it's a pressure box, not an OBDII one whereas the blackmaxx is

Are you running a DPF Delete?

ya i am running a 5'' strait pipe. the smarty deletes the dpf. is there any other moodules that can be run with the smarty other than the edge

More power than the SMarty? The latest revision has a 200 hp bump on SW9... Not sure how much the stock injectors are good for but it would be turbo time anyway..

The only ones that you can really stack with the smarty would be edge, mp8, or the power puck. But on a slightly modified truck you are pretty much pushin it to the max with your smarty. I know its a lot of money but next step unfortunately is fuel mods and turbo :tu:

I have a smarty and an edge... With the smarty on sw7 and the edge on the 80 horse setting... It really doesnt smoke that much.

before I personally went to much more power I would throw some head studs in the mix I do and I run the mp8 with the blackmaxx pretty regular either way your going to need to build for the horse power you are gunna make/fuel/air/studs:tu:

does any one know how to make a smoke switch on a 6.7

---AutoMerged DoublePost---

i have straight 4" edge with attitude smarty airaid cold air egr delete emm. delete turned up but not alot of smoke do yall know about making a smoke switch with this

yeah, it consist of tapping into the map sensor with a switch and a 100 ohm resistor, i'll try and find out which two wires to tap into tomorrow