07.5 Smarty & Delete problems..
I have a smarty set on level 7 with full deletes and i still get CEL with 3 codes one is unknown code, 1 is something like turbocharger boost sensor voltage high, and 1 is like EGR temp sensor too high/ or high voltage. Sorry i cant remember the exact codes.. also my overhead periodically shows catalyst full service reqd.. and it is a dog now almost like limp mode... i dont get it.. runs normal till it starts to boost up seems like.. kinda either boost or rpm relevant you know.. thanks for any help please...
|
are you running an me file?
|
No idea.. straight putta the box..
Turbo just took a dump on me... guessing that was the problem.. |
Well look at the numbers when u first plug the smarty in at the end should say me if not let me know and ill send you some files cause u have to run the me files and with the codes your throwing sounds like your prolly running the wrong tuning that might have helped cause your turbo to crap out
|
Ok what is a ME file exactly??
|
Middle East off road tune. Deletes the DPF
Luke |
It deletes all the emissions egr dpf all that good stuff
|
Well my guy ''says'' it has that but were gonna update it.. thanks guys..
|
dont sound like it with the codes your throwing
|
ya.. also should i upgrade turbos or just stay with the stock??no ex brake so that doesnt make a difference.
|
if it were me. i wouldnt hesitate to call tony at mightydiesel and order a II silver bullet 66. i love my turbo and you would be better off away from the stock one
|
the reason i still have my stock turbo is the exhaust brake feature. i have sold several silver bullets and not one customer unhappy. :hellox:
|
I'm getting a 62/80 phat shaft rebuilt at the moment... might just slap it on there.. will it spool it good enough with just a smarty???
|
it will spool fine but its a little small for the 6.7 but it will work dont forget you will need a manifold
|
All times are GMT -5. The time now is 07:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands