6.5 exhaust brake?
Ok, so im gonna swap out my gm-3 turbo and put on a Holset He351ve off of a 2008 6.7l cummins. The only problem is that the turbo has a exhaust brake on it and i want to use it, but i am unsure what will happen when i turn the ebrake on. What i am affraid of is that i might blow a head gasket or something like that. Any advice on the swap will be useful.
|
no one that i know has used the exhaust brake functions on a 6.5 equipped with a He351 so not much info about it. im sure a set of studs would help this from not happening
|
If you have a you tube account, it might be worthwhile to contact the guy that has a video of one on there. He should have some info.
---AutoMerged DoublePost--- Would there be any problems with putting a Banks Sidewinder in the place of a GM-5? I think the Sidewinder is a superior turbo, but it would take some know how no?:humm: |
are you talking about the non wategated turbo off 80's 6.2?
|
I'm assuming it would be non wastegated, I was looking a purchasing just the turbo and parts I need from an old kit that a dealer has on the back shelf. But there shouldn't be any reason why you couldn't externally wastegate it.
|
im not sure if it is superior to the gm5 but yeah you would have to put a exterior wastegate cause those old turbos were used for old 6.2s with less fuel being injected and less boost.
|
All times are GMT -5. The time now is 05:25 PM. |
© 2024 MH Sub I, LLC dba Internet Brands