lp upgrade
 

anyone know if my ac delco ops with relay mod(powered by ops) will power a frc-10 lift pump?
or will i need to find an alternative ignition power feed, if so from where pls. pump and ftb on route for 95 6.5l turbo

Check the amp rating on the relay. Shouldbe around 30 amps, but that depends on which relay you used. If the RC-10 lift pump has a max amp rating less than the relay amp rating, it will work fine.

i used a 40amp relay and frc10 asked for a 5 amp fuse so i should be good thx. fyi new lp is rocking a steady 9 psi at idle. it bounced between 3 to 6 at idle befor with a new stock lp.
cant say i feel any differance but i know my ip should not have to work any harder than it already does.

now if i could just get my ftb as ordered on the 14th, im thinking the treat it comes with might have got caught at the border. so i wait:w2:

Glad to hear everything is working perfectly.

I dislike playing the waiting game on new parts......

i got my ftb kit today. it seems the 90 off the ip is 1/4" id. any one know if i have to use this or is thier a 90 that will keep the 3/8 id?
i got 3 fittings, ffm is 3/8, adaptor for 90 in ip is 3/8, hose 3/8, then the 90 with a small id?

found it. i just needed a #6 jic straight barbed fitting to replace the 90. not 3/8 but bigger id than the kit came with.:c: