Intake Manifold
 

what intake manifold are you guys running?

AFE Bladerunners and ATS Arc-Flow are the most common intake manifolds I see. Of course there are a lot of people fabricating their own.

There's two parts to the intake (post IC). One is the intake elbow that takes the cold IC side air flow and directs in into the intake manifold. The 6.0 intake manifold houses the EGR valve, and runs in a "U" shape over the heads.

I run the Accufab Power elbow and have been very happy with the results. I have one port that I use to monitor the boost PSI. For the cost it's worth it to me.

There's only one person I know of that is selling a modified intake manifold for the 6.0s.

I ment the elbow. Sorry. If the elbows taped can you monitor boost with that?

Yes...you could tap the OEM or get one aftermarket with a single tap or multiple taps.

thanks

I use the large mouth CFM elbow, matches up to the 31/2 cooler tube for the banks cooler, they have the stock size also, these are composite so they don't transfer heat into the intake..