9mm to 7mm conversion
 

I recently received a set of stock non I/C injectors from a member, the goal is to convert them to be used with an I/C head that was exchanged. I will post some more pictures and information later, so far this is the visible change, stock on left machined on right.

http://photos-g.ak.fbcdn.net/hphotos..._2654360_n.jpg

just turned down part of the nozzle? wouldn't it be a wash in machine time vs. buying new nozzles?

SWEET MAN i need them ASAP that pop pop noise is driving me nuts and the power sucks take lots of pics and notes iam curious on this

Time is not my concern, even if I paid to have the nozzles turned down, it would be much cheaper, but since I am doing the machine work, that is not an issue.

so you can remove that much material and there will be no "structural" issues? just wandring...

Yes, the common 6-hole Sac nozzle used in the 24v application is a Mack nozzle turned down in the same fashion.

---AutoMerged DoublePost---

http://photos-d.ak.fbcdn.net/hphotos..._2559462_n.jpg

http://photos-f.ak.fbcdn.net/hphotos..._1022538_n.jpg

http://photos-g.ak.fbcdn.net/hphotos..._1004706_n.jpg

http://photos-a.ak.fbcdn.net/hphotos..._2643418_n.jpg

that is cool that they are that thick. i guess you are only removing 1mm of material off them so it isn't like a bunch.

A few pictures of the process.

http://photos-e.ak.fbcdn.net/hphotos..._6853605_n.jpg

http://photos-g.ak.fbcdn.net/hphotos..._3667253_n.jpg

And the finished product.

http://hphotos-snc3.fbcdn.net/hs051...._4140685_n.jpg

The set fired really well for being 20yrs old, I added 0.010" lift and set the opening pressure to 245BAR, they originally ranged between 200-225BAR.

oh god i just peed a little when i saw that

iam so excided

weston the 245 bar thing i trust you 100% but i have been told that will ware the pump out realy fast because it has to strugle to get them open?::s:

---AutoMerged DoublePost---

what did you paint them with

Stock opening pressure is 245BAR, I removed the paint.