how do i make an 07 5.9 cummins smoke? while making a lot more power
I have a 2007 3500 with a 5.9 cummins
I want to make my truck have more power and if it happens make a nice cloud if i goose it Thats ok. what is the best way to do it without causing damage to the truck? i currently have stock exhaust however i plan to upgrade to a banks (Shop around) 4 inch. any pointers please let me know |
Oh boy here we go again. Lol.:s:
|
Pour gas on the roof and light strike a match. Works every time.
|
+1 But id mix a little oil in with the gas. You get more smoke that way. Not quite like a train, but damn close.:hellox:
---AutoMerged DoublePost--- Or you can sell your 07'. Buy an old 12v. Then completely remove the fuel plate and put "marine" injectors in it. Roll Coal baby:choochoo: |
Smarty + low boost + throttle = smoke.
Or on a budget, the gas 'nmatch thing will do it like was mentioned. :argh: |
READ the thousands of threads on DB..... Reading, its a simple thing that can bring so much knowledge to you.
|
Originally Posted by MrSandman818
(Post 821136)
+1 But id mix a little oil in with the gas. You get more smoke that way. Not quite like a train, but damn close.:hellox:
---AutoMerged DoublePost--- Or you can sell your 07'. Buy an old 12v. Then completely remove the fuel plate and put "marine" injectors in it. Roll Coal baby:choochoo: |
Excess soot like that WILL damage the engine. The oil can only handle so much before it needs changed. Also, your running the risk of blowing tips off injectors if you get a hot enough programmer.
My advice, DON'T do it. :tu: |
Originally Posted by FF54EMT
(Post 820932)
I have a 2007 3500 with a 5.9 cummins
i don't want it to smoke like a train a little bit, i pretty much just want it to make a nice cloud if i goose it. what is the best way to do it without causing damage to the truck? i currently have stock exhaust however i plan to upgrade to a banks 4 inch. any pointers please let me know On other forums we would call this post a troll post. |
bag over the air filter. would you like paper, or plastic? :tttt: :argh:
|
All times are GMT -5. The time now is 10:49 PM. |
© 2024 MH Sub I, LLC dba Internet Brands