Smarty question for BOB "CA Users"
 

Hey Bob sorry to bug but you never got back to me!
Just a few Questions
1) How much timing is too much? If I run propane or NOS what works best? I have a water meth injection system if that matters.
2) What does the on demand numbers mean? 0-99?? And how does it equate between settings such as: # 5 at 70 and #9 at 50??
Don’t really understand what the difference is?
3) What works best for milage I run 65mph at 2000rpm and get about 22 to 24mpg hand calculated! I have the smarty set at # 5 at 70.
4) CA is going to smog diesels what setting will get me through the snap pedal test? Will there be anything downloadable to help your CA owners?
Just so you know I have a 06 dodge 5.9 and the smarty 06 pod
Thanks a lot for your time!!

Andrew Danz
P.S. My mods are 90hp injectors, MP-8, CP3 Arson kit, Head studs Phat shaft 62, Water meth system, airdog 150 at 20psi,

This is a copy I sent in an e-mail in case the e-mails are not getting thru!

I know that the lowest setting ( #0)on the SMARTY is half power. Try it out and see how much smoke you get.

That is exactly what that setting is for!!

(If that doesn't impress them you could always try the highest setting! . . . :pca1: )

:scare2: