Looking for a baseline on a 3rd Gen CR 600 series
Well I got the muffler delete pipe, gauge package incoming once I get all that installed what "should" I see for readings on a stock set up?
:pc: Boost: EGT: Fuel psi: |
At what range, Idle, WOT, Cruising speed?
|
at least Idle but across the board would be nice
|
Mine is about
fuel - 7 to 8 boost - depends but cruising is usually about 10 EGT - around 600-700 cruising I consider cruising between 60 and 70. My boost spikes at 30 right now. Also remember that I have a 6 speed and my EGT probe back, monitoring cyl 5 & 6 |
10psi is normal for the Cummins, FYI I see 3psi on my Dmax?
|
Originally Posted by 06 DIESEL
(Post 33142)
Mine is about
fuel - 7 to 8 boost - depends but cruising is usually about 10 EGT - around 600-700 cruising I consider cruising between 60 and 70. My boost spikes at 30 right now. Also remember that I have a 6 speed and my EGT probe back, monitoring cyl 5 & 6 Mine is really close to this too. But boost has always spiked around 33. Don't know about fuel pressure though. |
Thanks for the info guys, should give me a good starting point to reference
|
All times are GMT -5. The time now is 12:53 PM. |
© 2024 MH Sub I, LLC dba Internet Brands