|
Turbo Whistle Increased 80% in 15min...
5 Attachment(s)
Here are the photos of my new Amsoil 4510 ($83shipped) and PVC ($30) Intake...
1.) Stock Elbow from Turbo... 2.) 4.5" or so Male to 4" Male fitting - Thinner Sewer PVC (not standard shc40) 3.) 3.5" piece of 4" Sewer PVC 4.) 4" 45° Elbow Sewer PVC 5.) 4" 90° Elbow Sewer PVC 6.) Amsoil 4510 - ($83shipped) Attachment 54729 Attachment 54730 Attachment 54731 Attachment 54732 Attachment 54733 Painting will come soon. |
weres the pics and what did you do to acheive this
|
this is a 3rd gen not a 12V
|
The WHISTLE on this thing is UN-REAL! It sounds like a Big Rig Turbo...
I can feel the difference in response and overall throttle going down the road. Its like a big cork was pulled out of it. I was running a K&N with a homemade cold air induction... THIS BLOWS THAT OUT OF THE WATER! I would be interested in knowing the HP gain 'cause I can feel a difference. Really happy with it. ---AutoMerged DoublePost---
Originally Posted by DieselMinded
(Post 259001)
this is a 3rd gen not a 12V
Well that is a big kick in the pants... I got used to this being my home working on my 12v so much. Well maybe the Admin can straighten this out... BUT! I have already ordered the 4510 again and will put this on my 97... It should rip with this in it. It is much shorter and closer to the Stock Box than my 24v... Sorry for the Mishap... I will try to work up the PVC this evening on the 12v. I certainly have my hat in my hands for this one! |
yep a intake system will do it
|
probably should look into getting a heat shield between the filter and the engine... Kind of defetes the purpose of a CAI without it as you will just be sucking in hot air and be careful going through a big puddle of water, dont want to suck up an water..
water injestion = BIG problem |
3 Attachment(s)
Just got it painted and reinstalled. I shaved down and sanded all of the factory molding spikes, Stamping, and mold creases... I may paint it a darker metallic or flat black now that a have a plastic adhesive base.
I used a Hammered Metallic for Plastics & PVC... Also flipped my sensor around to have the wires go under. Attachment 54684 Attachment 54685 Attachment 54686 I will look into fabing up a shield soon. |
wow, looks kinda familiar hehe
http://i343.photobucket.com/albums/o...ang/car012.jpg |
would it make any difference using bigger pvc pipe?
|
Originally Posted by 06MegaCTD
(Post 263770)
wow, looks kinda familiar hehe
http://i343.photobucket.com/albums/o...ang/car012.jpg |
| All times are GMT -5. The time now is 10:47 AM. |
© 2024 MH Sub I, LLC dba Internet Brands