AEM METHANOL/WATER INJECTION
 

--------------------------------------------------------------------------------

looking to install a methanol/water injection kit - to my 2003 truck.
already have predator and puck, s&b cold air intake, CFM intake elbow, 5" turbo back exhaust.

just looking to see where to attach/"t" into boost line?
where would a boost line be - or do i need to drill and tap into intake elbow and run from there?

don't do lots of towing - just wanna have a little insurance and/or better mpg/ egt's when i do.

kit i have coming is just a universal kit from "AEM"

THANX
CODY

on my chevy i ran it in my intake elbow and in my buddies dodge he also ran it in his elbow. i have never herd of anyone running it anywhere else you would want it as close to the motor intake as possible lol but make sure you have big enough nozzles if its a universal kit. . . with what your running anyways

I would tap the intake boost tube coming from the intercooler... if that is what you mean...

not quite its right after the tube the cast iron piece is what i was taking about but i also have the egr crap still on my truck and i wanted it after that so it wouldnt get caught up . . .

---AutoMerged DoublePost---

but you could put it there too just as long as its after the intercooler :ok1: