No disrespect.., but if you are doing tips. HAve them pop and flow tested before reinstalling them. I learned THAT lesson the HARD way. :argh:

I've seen guys running 12.30's on injectors and nitrous and a good programmer, built tranny of course

Mine was running 12.5 on fuel only, and that was before the R700's came out. My build was -

90hp nozzles
Industrial 45% CP3
FASS
BD Tow Twins
TST
DNM Transmission

I used mine for daily driving and for towing. Gawd that truck loved to tow.

I have an HTT 66/71/16ss turbo, Hts trans, Flux 3.3's, stage 2 Floor-it cp3,ts the only htings I have addedto make it faster. I also run 35" tires and run 12.6's @ 110.
You got the trans right go with Hts their great. Cp3 go with Floor-it once John is recovered and Formula 1 injectors. I have no idea about mileage I never check it.

I run 12.5s and dont have injectors or a cp3 or even a arson kit. Just pick your parts wisely.

Do you stack the edge/smarty/mp8? or just use the edge guages with the smarty mp8?

I dynoed the edge with a SPS 62 and made 541.....I would like to be at 600 or so and might do a pressure stack on the edge next.