Anyone have aftermarket one piece headlights?
 

Does anyone know how to adjust these suckers? I can't figure it out It seems ones good and the other is far off but I can't see crap at night and its driving me crazy

Sent from my dumb phone!

i dont think you can adjust them i have an 01 and mine dont seem as bright i think my lights spread the pattern out wider making them seem dimmer i will be upgrading bulbs soon.

I read somewhere that some of them have screws that are a pain to get at.I looked at getting some of these ,but decided to get the sport lights instead after reading a bunch of posts.

Oh damn all I know is I can't see hardly anything I really don't want to get rid of the lights cause it makes the truck look good but I might have to

Sent from my dumb phone!

I ran across some at Harbour Freight for around $5 each. For that cheap, I bought them and they are 2 x as bright as the stock lightbulbs. Really white.....not the factory yellowish glow.

That may be part of the problem if the bulbs are yelooe

Sent from my dumb phone!

I was just referring to the fact that the factory light bulbs are very dim.

Oh well that to. Ill look at it tonight. I know there's two bolts no torx like I've seen searching

Sent from my dumb phone!

This is why you dont buy the one piece aftermarket headlights

I didn't buy them came with the truck

Sent from my dumb phone!

At one point I had some aftermarket one piece lights. The adjustment screw was on the back of the light and the assembly had to be removed to adjust it. :argh:

I plan on getting some LED halos sometime soon.. Probably gonna be one peice. Would it be too much to ask for a couple of reviews.? So far they aren't looking too great..

I have the one piece headlights and they suck. I can't figure out how to adjust them up or down or if just the bulbs are junk haven't looked at it to hard yet.

Sent from my dumb phone!

I had one piece housings at one time I no longer do. My adjustments where in the back, they could be reached with a small stubby screw driver but it was not easy. The actual reflective portion of the housing is what gets adjusted not the entire housing. If yours are the same as mine were it should be a gold screw with a star washer around it.