Lift pump and fuel filter delete
 

So i have had my airdog 150 on for about 7 months now and was wondering if anyone knows where I can get a kit to delete the stock lift pump (on the block) and the fuel filter???? It would make it look alot cleaner and have more room. I have seen them on schied diesels web site but it's not there any longer I am also gonna post this in the price quote sections...
Any info is appreciated thanks in advance:c:
Josh

i think you can just remove the bolts etc that hold both in place, and do away with them.. theres no delete kit, just rip it all off...

I agree. Remove everything and use plastic bags to cover the electrical connectors. The only thing that may give your grief is the water in fuel sensor. It would only take a resistor to confuse the ECM though.

I did have to use a space for the intake plate from what I recall. the thickness of the removed part, been a while. lot cleaner and easier access to the sensors.

Hmmm, shorter bolts would be necessary for the intake plate where the fuel filter comes off. Good point. :tu:

Thanks guys just wanted to make sure before I tore into it and needed to order parts...
Thanks for the info guys:rocking:

No problem. If you have the time, would you take some pictures and do a little write up?

Sounds like a Good idea... I will see what I can come up with, may be a couple days before i do so but I'll get a write up on it:tu:

There is two bolts that you'll take out from the bracket for the factory block pump that are shorter and work perfect. I just did this last month. Removed the filter and factory lift bracket and all that. Just to save you some time finding bolts :tu:

Thanks for the info I appreciate it:c: