injection lines
 

Any one know were i can find a set of .093 lines for my 02 24v any help would be nice thanks.

Schied Diesel... but I wouldn't run them on your setup, going to surge like a motherf*cker, also need .093 connector tubes with them but if I were you I wouldn't do it.

well im buying a monster vp or hot rod and didnt know if i should go ahead and run bigger lines also what do you guys think

if your getting a bigger VP, and u have the fuel supply, roll with new lines and connector tubes.. u should look into slapping a new cam, and some valve springs in there too....but in my opinion.. i dont think ur injectors are big enough

I don't suggest larger lines and connector tubes until your pushing BIG fuel. 250+ injectors and a bigger pump. Performance wise you wouldn't notice much, and it would idle rough.

allright guys thanks for i apriciate the advice ya im thinking a cam first whats yours guys opinion on cams i need some help in that area too i was thinking hamilton but i could use the help thanks guys

Have a look at this thread for Cams:

https://www.dieselbombers.com/24-val...cam-do-me.html

188/220 Hamilton Cam is one of the best all around and most popular cams.

On the topic of a monster or dragon flow vp, not only are your injectors not big enough but you need air for all that fuel, you still running stock hy35? Normally when you start looking at monster pumps and bigger lines is when you are well over 650hp and the s.o vp44 wont fuel you any further. Supporting mods at that point are pretty intense, and you don't have any of them yet.