lookin for mods
Just finally came got some money to stick into the truck. Where is the best place to start mod wise at a fairly decent price?
|
To save money in the long run, a good lift pump. I don't see one in your signature if you do have one. A set of injectors would be good after the LP. 100-125HP with a stock turbo is about max.
|
whats a good fairly priced lift pump? I just got the stock
|
$500-$600
|
You will have to think about your trans with the extra HP. You may wanna look into a new TC and upgraded valve body as well :tu:
|
put money into the things are going to break first. liftpump is a big big yes to do to any truck. I honestly would save money for the t/c and valve body.
|
on my truck i have an aftermarket lift pump and a stock injection pump that was just replaced before i bought it
is my injection pump most likely going to have problem too? |
Definitely an after market lift pump with Air Separation capability. Your injectors will thank you.
|
the only way your injection pump will have a problem is if you slap big injectors in there and install a chip or programmer on as well without a solid lift pump..check out the airdog 150 or fass 95 or fass 150. those are all good pumps with fuel water separators and fuel filters!
|
i dont know what company makes my lift pump i cant see any markings but i know its not one of those two stage ones
|
All times are GMT -5. The time now is 04:05 PM. |
© 2024 MH Sub I, LLC dba Internet Brands