compounds? help this retard lol
 

i have what i think came off a 3406 or 3408 it specs on the intake side as best i can tell are around76mm inducer and108 ex and the exhaust is 98 exducer i cant get the inducer size the intake cover is stamped with a/r.78 or.75 cant read to clear would this work in compounds with either a super b or hx35? i have 4 large turbos and 2 smaller to work with...

Here is the size of my S400:
http://img153.imageshack.us/img153/1162/s400size.gif
My A/R is 1.32 or 1.43, I can't remember for sure. My set up works really well, and I have heard that the guys at PDR claim it will handle 600RWHP.

thats close to what i got it just looks like a huge a$$ turbo.. i'd hate to do the piping again and it not work

The smaller A/R will spool up quicker, could be a good thing. I tried to get a A/R of 1.00, but ended up getting screwed by the seller. Apparently vernier calipers are a bugger to use.:humm:

ok thanks cus the exhaust housing looks huge compared to the intake housing

That turbo should work fine with a Super B if you have enough fuel.

well i only have 100 hp injectors and edge with attiude hot unlock but i also tow a bit with it

would that be enough fuel? if not i could do this huge turbo with the stock hx35

ok i cleaned up this turbo more and found another number it also has 1.58 stamped on the exhaust housing... it has .75 on the intake size can somone explain this to me? also if anyone knows the measurements for flanges feel free to let me know i think this turbo is a t5 , The ht60 i have was a t6 and my downpipe is off a 1/4 of an inch