What Turbo Should I Get
 

I was wondering what brand of turbo I should get. I don't want one to big were I have to do a lot of work to my head. But big enough were I can get around 40 pounds of boost.

What Turbo Should I Get
 

Industrial injection phatshaft 62 44psi spools way fast

Phat Shaft 62 will work great with your injectors.

it's not boost your after it's amount of air the turbo can move. I would rather make 20psi and not have to worry about it. But with 110's a 62 would be nice. It will make more than 40psi though.

Re: What Turbo Should I Get
 

The Wastegate is set at 45psi. So you will make between 43-47 psi

But won't my head gasket go out.

I've pushed 57 PSI multiple times without a head gasket failure. Stock gasket, stock head bolts, 202,000 miles on the original engine. I'm not saying that it won't, but mine has held in there.

Re: What Turbo Should I Get
 

Id retorque your headbolts when you install the new turbo.

Shoot I am on my second hg don't go over 48psi had a bd single and a special really good turbos.I would get a bd special love mine!

Drive pressure kills head gaskets faster :tu: