Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   5.9L 24V Performance (https://www.dieselbombers.com/5-9l-24v-performance/)
-   -   PPE lift pump (https://www.dieselbombers.com/5-9l-24v-performance/69246-ppe-lift-pump.html)

Razram55 01-30-2011 10:10 PM

PPE lift pump
 
Im considering buying a 160gph PPE lift pump off a buddy of mine. All it is, is the pump. Is all that i have to do is remove the stock lift pump and put the PPE inline? Or do I need to change out fuel lines and do other modifications? Also anyone have any feedback about the PPE lift pump?

dukeboy_318 01-30-2011 10:37 PM


Originally Posted by Razram55 (Post 699524)
Im considering buying a 160gph PPE lift pump off a buddy of mine. All it is, is the pump. Is all that i have to do is remove the stock lift pump and put the PPE inline? Or do I need to change out fuel lines and do other modifications? Also anyone have any feedback about the PPE lift pump?

best bet it to contact PPE or see if they have instructions on their website.

However, if they are like most other pumps, you'll need to run new lines into the pump from the tank and then from the pump to your filter housing and simpling disconnect the lines and wiring from the factory pump. Thats if you have a block mounted lift pump, if you have an intake pump, you'll need a seperate draw straw kit in order to suck fuel from the tank.

Diesel Dawgs Performance 01-30-2011 10:39 PM

That pump should be mounted on the frame.

Razram55 01-30-2011 10:43 PM

ive got a block mounted pump.

Diesel Dawgs Performance 01-30-2011 10:44 PM

U can get a kit to install that PPE on the Frame

Razram55 01-30-2011 10:47 PM

That a kit that comes with everything i need to install it or it it just a bracket?

dukeboy_318 01-30-2011 10:52 PM

Lift Pump Install Kit [1130580] - $39.99 : Pacific Performance Engineering, Innovations in Diesel Performance

install kit, says its for a dmax though:humm:

Razram55 01-30-2011 10:56 PM

pretty much some 3/8ths tube and some hose clamps? I already got the fittings on the pump so i just need to find a way to mount the pump to the frame then run a larger line.

dukeboy_318 01-30-2011 11:11 PM


Originally Posted by Razram55 (Post 699555)
pretty much some 3/8ths tube and some hose clamps? I already got the fittings on the pump so i just need to find a way to mount the pump to the frame then run a larger line.

just do what the guys from pure flow technologies do, get 2 flat 1/8 inch steel plates about 10 inches long, 6 inches wide, drill some holes and run some bolts through so that the frame is between each plate , 2 bolts above frame rail, 2 under it, no drilling the frame, tighten the bolts down. use some type of band clamp such as an exhaust clamp or U-bolt to hold the pump to one of the plates, get you some diesel grade fuel line from local auto parts store, th wiring harness is the tough part, unless you have it

---AutoMerged DoublePost---

http://www.xtremediesel.com/manuals/...ual%202408.pdf

scroll down to page 4

farmboy69 02-24-2011 10:24 AM

I had a PPE and I went through three of them before I bought a Fass they just never lasted very long and I got tired of spending 300 bucks once a year


All times are GMT -5. The time now is 08:31 AM.


© 2024 MH Sub I, LLC dba Internet Brands