map sensor question
 

on the connector from my edge to the map which terminal is thie signal and what one is positive.

On 3 wire sensors, the signal is in the middle, with power and ground on the outsides. Red for power, Black for ground, and a different color for signal. Green, Brown, and Grey are very common. What are you looking to do?

some thing a lot of people on here would prob bitch at me about.
The smoke switch:w2:

Your right about that! I should have asked first.

thats alright, iam prob not gunna do it.:c:

---AutoMerged DoublePost---

Ryan,congrats on ur new setup hows it runnin?

24vmatt,

LOL....I thought it was funny. But anyways....I tried that went in and watched a few videos and read all sorts of threads on it. I could never get the darn thing to work like what everyone else claimed. In no ways am I saying theirs never worked, but I know mine did not. So I removed the so called switch and soldered my wires back together. As I look back on it, the time I spent on this is time I will never get back....JUst my .02...

oudive

ya, ikd if it works or not but i will find out.

Turbos are doing well, thanks for asking. If I can get some free time this week I'm going to make some custom brackets and linkage for the wastegate and get it back in the system. I have also acquired a HX40 that has a good compressor wheel and housing. Might be making a hybrid soon as well. Still blocked at 47 PSI, but its 11 more than I had and I'm running way cooler. The sound it makes isn't horrible either!
No action on the BlackBerry lately, everyone still kickin'?

sweet, good luck with the brackets and linkage.I cant wait till i can compound my sh!t..

24vmatt,

When I did mine, I ran my switch to the sunglasses compartment so it was out of sight and out of mind. Lemme know how it works out. Good luck and hope you have a better turn out with it than I.

oudive