RAPTOR 150 PSI
 

What should i set the psi at?
Its at 25 psi at idle now.
Thanks:tu:

thats a little high for the vp in my opinion. 17 is a good number at idle.

i know its an aftermarket vp, idk what it is though? how do i tell.
it looked liked an industral injection pump like my buddys....:w2: but idk?

Yeah 25 psi is alot for a vp44. I like to see 17 to 19 at idle

ya when i first put it on the psi was 34. So i turned it down to 25, but its at 18 at idle now.

---AutoMerged DoublePost---

now when i can afford it i need 75-100 hp sticks and a super b from Luke @ DIESEL DAWGS:rocking::choochoo::choochoo::yeah:

That's a good safe pressure. Your truck will run good when you get those sticks. I used to have that exact same setup. It ran good!!!

HELL YA:choochoo::choochoo:

Mine is adjusted running around 20 to 22. It kinda likes to change psi at idle between 20 through 22

I would keep it around 18psi at idle.


Luke

Thanks Luke