cost of p pumping a 24 valve?
How much does it cost to p pump a 24 valve thats with buying everything probably used?
|
ONE MILLION DOLLARS!
|
More realistically - more like $2-3k or more.
Thats pretty much a guess though. I believe Sheid and/or Enterprise Engine has kits you can buy. |
just finished mine, with a 175 pump all the front plate gears, throttle, ddp dvs, 4k gsk, lines, and a Diesel Pro cam... mine was $2575. SUPER CHEAP for all that stuff. my lines are .093 mild steel. i got most my lines from Aden at GOS Performance ;) if your lookin to do it, find the parts off a scrapped 12v. i got my parts plus pump for like $1100 so there ya go
|
How do you like it? What are you using for injectors?
Theres a lot of misinformation on diesel forums saying the conversion isnt street friendly. Which just isnt true. |
Originally Posted by connermcpherson
(Post 509061)
just finished mine, with a 175 pump all the front plate gears, throttle, ddp dvs, 4k gsk, lines, and a Diesel Pro cam... mine was $2575. SUPER CHEAP for all that stuff. my lines are .093 mild steel. i got most my lines from Aden at GOS Performance ;) if your lookin to do it, find the parts off a scrapped 12v. i got my parts plus pump for like $1100 so there ya go
|
check out this months issue of dieselpower mag it has a yellow and black dewalt ford on the cover... they have an article on p-pumpin a 24valvle and how its done and how much it costs... i know haisley machine sells a conversion kit for around $1300 i think and then you gotta get a pump
|
Once you sell the stuff you pull off it isnt that bad at all. I recommend finding a good pump and all the parts used, this will save alot of $$$. It's hard to put a cost on it because there are so many different things that can come up. I did a cam and a few other things at the same time. As far as being street friendly goes I love mine. I got lucky and did not have a tuning nightmare like some though. I put mine all together set the timing at 24*, pulled the plate out of the pump I had on, moved the AFC FF and it was perfect. I had 17 miles on my swap and got in the truck and drove it to NC 900 and some miles, daily drove it for 2 months, dynoed it, and drove it home with no problems. If anyone is close enough they are welcome to come go for a ride or look it over once it is back together. It's back in the shop for another surgurey right now.:argh:
|
Originally Posted by cummins.1.5.3.6.2.4
(Post 511227)
check out this months issue of dieselpower mag it has a yellow and black dewalt ford on the cover... they have an article on p-pumpin a 24valvle and how its done and how much it costs... i know haisley machine sells a conversion kit for around $1300 i think and then you gotta get a pump
|
I think Haisley's kit is alot closer to $1800-$1900
|
All times are GMT -5. The time now is 09:01 PM. |
© 2024 MH Sub I, LLC dba Internet Brands