i might have misread something but i recall reading that the stealth plate actually increases HP and TQ. is this true?

 

It allows for the connection to be made at the VP44 from a performance product that adds fuel/timing, such as and Edge Juice. Without a fueling box, as in a superchip reprogrammer, "tapping" is not required. A stealth plate is a cleaner way to "tap" the pump without damaging any wires.

 

Thanks for the info. Im just about to do it on my truck.

 

Thank You very much!

 

Excellent pics

 

There is no opinion! You mentioned it already. a test light does not belong into a mechanics toolbox any longer.

In germany the mechanic is now called mechatronic. It shows where the trend goes:
mechanic+electronic
Even the cheapest multimeter will be better than a damage caused by the very low internal resistance of a "test light".
It should be a standard item in everyones toolbox.
A Multimeter has a very high internal resistance compared with the to be tested parts, protecting them from expensive damage- but, avoid to measure amerage in automotive applications.
Either the amperage is way to high for your multimeter (eg: do not try to measure amperage on a battery, starter or alternator or you can damage a lot of things. Those applications do need an amp clamp!

 

So who makes these stealth plates and where does a person find one before I do this install of the zilla adr?

 

BD makes them