p-pump 24v questions
ok a buddy of mine is wanting to do a p-pump swap and i am graced with the job. i got all the parts (a 12v donor engine). i know i gotta get injection lines and stuff, but what do i use for injectors? i was thinking about using stock injectors and putting lower pressure springs but we want a pretty good amount of fuel as this truck will be a drag/pulling truck.
Also any hints or tips would be greatly appreciated. we are doing this swap on an 01 engine, not in an 01 truck :w2: thanks |
https://www.dieselbombers.com/5-9l-1...ight=pump+swap see if this will help you in your project :rocking:
|
Seems to clear up some things. i have heard that getting the timing set is the hardest part. i am also wondering what size injectors would be good for around 800hp. the p-pump is a 160 pump with lcdv's, 4kgsk, i am gonna run .120 lines with .093 connector tubes. i am wondering if i use stock 24v injectors for now if it will be ok or not. i will be running a single turbo until i get money to buy twins. i am studding the head and putting a .020" over head gasket in so i can run twins and advanced timing.
Any tips or trick are appreciated. thanks |
All times are GMT -5. The time now is 11:01 AM. |
© 2024 MH Sub I, LLC dba Internet Brands