Stacking Programmers???
 

Hey all, quick run down, got a 01 24-valve, roughly 106,000miles, so far I have installed ATS 3 Piece Manifold, ATS high arc ait intake, K&N CAI, MBRP 4" dual stainless from turbo back, and Bosch 300hp injectors, as well as have an Edge Juic with Attitude. My question is, can I stack a Hypertech programmer onto the present programmer, and if so, will I see any gains, or am I just wasting time. I had it on there along time ago, but recently ran across it in the shop and was curious if I could still use with the other mods already installed. Thanks

Not sure on the Hypertech but I'm guessing it adds timing also, so I would say to be safe, no. Now you could stack a Smarty with it and run the smarty with no added timing. I'm sure someone with more knowledge with the hypertech will be of more help:U:

the hypretech cant be stacked with another downloader (smarty, superchips) if u can remove the timing from the hypertech it can be stacked with the stuff like the ez power puck and others like that

Ok so no on the Hypertech being stacked with the Edge, but the Smarty and others I would be good with. Guess really though I need to concentrate more on getting a better tranny<still stock> and upgrade the turbo<stock as well> first so I can see what Im turning rwhp...Thanks all

I think you would be better off upgrading your trans and for more power getting a nice set of injectors.

Ya I got the injector's already, Boosch 300hp's, but i was thinking about stacking the programmers, but I'm thinking the trans, and possibly head studs, to include a upgraded turbo is my only route now so that i don't tear something apart. LOL Thanks guys