Quad Pulse Questions and Answers
 

Hey guy's I just got my pulse and hooked it up. Now i have some ?'s. What is the difference between Vehicle speed and true speed.
And can you switch levels as far as when you have a program in say ADR2000. Can you go from level 1 (just timing) to say level 8?

i believe i have mine set on true speed
you can change levels anytime you want :ok1:
have your foot on the skinny pedal and change levels ya can feel it when it kicks in :w2:

So what button do you use and where do you find what level your on. I haven't found it yet. And what is the difference between true and vehicle speed?

Its on the Gauges page its the number to the center /right of the display

in the attached image you see the egt,boost,fuel and water readings and if you look over to the right you see a 3 in between 2 arrows that is telling you what level it is on

you use the middle 2 buttons of the 4 on the right to go up or down on levels

lil bigger pic for ya here.. it's in warmup mode right here, but you can see the pl# in the middle to the right of the display..
to change PL use the 2 middle buttons with arrows next to them

top button is menu, bottom is enter

Attachment 54962

Thanks guy's:U: I haven't really had a chance to go over the whole thing yet. I went out to my truck and I see it now:U:

Vehicle speed is the speed that the vehicles speedo is registering.
True speed is how fast the vehicle is actually going.
If you have oversize tires your true speed will not match the vehicle speed and you will have to use the tire size settings to get the True speed to register correctly.

or run a programmer that calibrates the speedo