Diesel Bombers - Pulse Is In Route

Basically, your smoke is gone because you are running on the minimums. In otherwords, you aint seen nothing yet.

Just to get you started in the right direction, go into the custom tuning menu, select load tune(file) and select restore factory defaults.

This will get you going with the COMP Tune and it will run right and smoke right!

Here is a little explanation I posted on another site.

Quote:

OK, we finally found out at least one isse with the new ver 1.3.2 update. Luckily it is a simple bug to fix and easy for the end user to go around it.

Basically upon downloading ver 1.3.2 there is an initialization issue when it gets plugged into the Adrenaline.

What happens is that the Pulse thinks it is in Custom Tuning profile, TUNE 2. This profile would normally send the max settings to the Adrenaline but, since this is a bug, it is sending the minimums.

Symptoms:

Lack of power
On goes up to PL03
No Smoke

Fix:

Enter the Custom Tuning menu, select Load Tune, selct Factory Defaults.

Problem solved forever. Everything after this point will be normal.

We will have a ver 1.3.3 that resolves this but, if you do the fix as stated above there is no point in updating it.

Next Problem, Pulse will not update:

First, try talking with Tech support and see if you can get it working. The Pulse should be easy to update.

We had an ex-employee that had a bad habit of not loading the bootloader properly on some Pulses. There were not that many, in the scheme of things, but, I don't have an exact count as she circumvented the system and they all look like they were flashed correctly.

Unfortunately, this fix is easy but, it has to be sent to us. While it is here we will gladly update the Pulse for you as well.

If you have any questions please let me know.

Now, if you do like I mentioned, there is no need for you to update your Pulse to the new version.

This next piece is simply for those that have not updated their Pulse yet. This stops it from having this brain fart at initialization. Here is the link:

Pulse CM USB Updates

This new site is going up in the morning so this particular link may be dead after that. Then all you do is visit the regular page and the 1.3.4 is there.