More boost
I'm wanting to get more boost out of my turbo. With the Adrenaline I've touched 30psi but I can't hold constant boost pressure over 20psi. Is the Edge boost elbow a decent investment or can I adjust the wastegate on a stock HX35?
|
You can adjust it, be careful you don't go over 40lbs. Otherwise you'll blow a head gasket.
|
how do you adjust it??:pca1:
|
Originally Posted by stkdram55
(Post 232656)
how do you adjust it??:pca1:
|
You need a better turbo!
You can run the crap out f the hx-35 but the truth is if you torture it too much! It will die! Anything more then 30 psi is bad! If you want more reseach the j-hook! Simple fast! And works. I killed my hy-35 hitting it to 35+ all the time! I scortched the shaft on it. It was a sexy blue color where the bearing were, and bent the backplat ( into a nice arch) And wouldn't spin worth crap! It had no excessive shaft play! Just torched it! I never ran it over 1350for more then a few seconds! And always cooled to 325 degrees before shut down! With my new turbo I can barley get to 1300 trying! And can hit 42 psi no problem! No worries! No looking back Just my 50 cents! |
I'm not looking to get insane pressure, mid 20s would be nice. How hard is it to adjust and what all do I need to do to adjust it?
|
with the hx you need a adjustable elbow. I think I have one from my edge setup as I had to jhook my hy. if you need it let me know... I think I still have it
|
while were on the subject of boost what does the boost of a dodge 2500 2008 6.7 run for boost stock?
|
Does the Edge boost elbow have a smaller opening than the stock elbow?
|
i think so
|
All times are GMT -5. The time now is 09:21 PM. |
© 2024 MH Sub I, LLC dba Internet Brands