|
Cummins Shift Knobs
|
Really good looking knob, but the price is a bit excessive for molded acrylic. I'd go with a Hurst Shifter for a lot less money.
|
if i had a cummins i would buy one.
|
My GF's gonna buy me the Black one :pals:
|
Check out Welcome to www.flameball.com
|
i want that black one, but yeah, they are a bit $$$
|
who knows where you can get those revolver shifter knobs that looks like it's got bullets in it?
|
ebay?
|
Acually she got me the gray one..... very very good quality.
http://img2.putfile.com/thumb/6/15215102725.jpg |
That's perdy!:U:
|
:rocking:
|
How about this one?
1 Attachment(s)
|
Anybody know the Dodge Ram shifter thread size?
Are the different trans all the same thread?
|
Originally Posted by 01CumminsRam
(Post 219360)
|
Cummins knob
I found a local site that does custom stuff. A few Dodge things on it. maddogmanufacturing.com
---AutoMerged DoublePost--- http://www.maddogmanufacturing.com/i...ooneybomb2.jpg |
Sweet
|
|
Thats Awesome
|
i know the thread size on my stock shift knob was 3/8 corse but i had to cut my handle to put a 7/16 corse stud on there for my eaton fuller shift knob
|
Wow, good to know they're different. I thought they were all metric. I'll have to find out what they put SAE and metrics on.
|
how do you get the darn shift knob OFF????? Mine on my 04.5, the gear pattern is upside down and i was trying to get it turned around right so my GF can see the shift pattern without having to look upside down... i have tried turning it, but it seems pretty secured on there... is there a trick to getting it to move?????:humm::argh:
|
You shouldnt need to take the knob off.
Im not sure about the third gens but on the second gens - if you take a couple of very small screwdrivers and gently pry out the shit pattern (its just a cover), you can reposition it where it needs to be (also use some sort of glue so it doesnt move again). There should be a nut under the shift pattern that holds the knob to the stick. |
Originally Posted by JTProuhet
(Post 251607)
how do you get the darn shift knob OFF????? Mine on my 04.5, the gear pattern is upside down and i was trying to get it turned around right so my GF can see the shift pattern without having to look upside down... i have tried turning it, but it seems pretty secured on there... is there a trick to getting it to move?????:humm::argh:
Not sure about yours,it might be different:pals: |
if i had a cummins id get the red one
|
Originally Posted by Dr. Evil
(Post 251621)
You shouldnt need to take the knob off.
Im not sure about the third gens but on the second gens - if you take a couple of very small screwdrivers and gently pry out the shit pattern (its just a cover), you can reposition it where it needs to be (also use some sort of glue so it doesnt move again). There should be a nut under the shift pattern that holds the knob to the stick. |
I would think the third gens would be the same.
|
1 Attachment(s)
I really like this set of shift knobs, spendy? Yes. But they fit your hand great, and look better then the stockers.
|
Not sure if anyone answered the question about the revolver shift knobs. Here is a site ordered one from, got in in .44mag with empty chambers to carry spare ammo....*L*
.44 Magnum Billet Shift Knob - 44magbillet |
Originally Posted by Desperado
(Post 272022)
I really like this set of shift knobs, spendy? Yes. But they fit your hand great, and look better then the stockers.
|
Shift knob ideas for free or cheap!
https://cimg6.ibsrv.net/gimg/www.die...bb3c37331.jpeg
Connecting rod shift handles, from the scrap pile out of a 6.9 international. |
| All times are GMT -5. The time now is 10:44 AM. |
© 2024 MH Sub I, LLC dba Internet Brands