DT Profab Adjustable Trac Bar. Anyone Run It?
Thoughts or comments about this bar? I've talked to Don Thuren, who is a great guy, but he's backlogged for a few weeks. I kinda need it now.
|
I ran it and liked it alot. it can be adjusted while still on and there is no welding. Dons is a good bar but can do the above and has to be welded.
when My heim wore out (2 yrs) I replaced it with a really strong poly bushing that Don makes. Just ask him he will know what you're talking about. After doing that the truck seemed to ride better than with the heim. I'm not a big fan of Heim joints for DD. they dont ride as nice |
Been runnin it for almost 200,000 hard earned miles now and love it.
|
Good to hear. I'm trying to order one... Just can't get a hold of anybody. Sent an e-mail a few days back.... and left a vm on the phone. :(
|
He is just a small shop so they may be on vacation or somethin, but I just talked to him a few weeks ago so he is still around. here is a link with the number I got ahold of them at in case your using somethin different. DT PROFAB PRESCOTT AZ 928.776.4129
|
Originally Posted by GRI
(Post 146783)
I ran it and liked it alot. it can be adjusted while still on and there is no welding. Dons is a good bar but can do the above and has to be welded.
Thats not necessarily true...with a Thurenfab trackbar on a second gen, thats lifted under 3" it does not need to be welded. Under 3" of lift: Thuren Fabrication - 0-3" lift track bar 5+" of lift requires the welded brace: Thuren Fabrication-Dodge track bar |
I stand corrected.
|
I cant say about third gens though....
|
Well to take this a step further, I welded the bracket on for my DT also. I'm sure the bolts would have worked fine but I overkill everything I do.
|
I have Don's bar, can't say enough about it, I greased up the uniball before I installed it just to be safe, and its been well worth the money.
|
All times are GMT -5. The time now is 02:55 AM. |
© 2024 MH Sub I, LLC dba Internet Brands