built tranny?
 

so i recently bought a 95 12 valve and a few people are saying the tranny is built. im not sure how else to tell other than the tranny shifts harder than normal into gear. any ideas?

Might just have a "tighter" converter. Or idle is a little high.


Sent from my iPhone using Tapatalk

Pull off the inspection cover on the bottom of the bell housing, see if the torque converter has any markings. That may be a start.

whats idle supposed to be. i think mine is at like 6 or 700

a fuzz higher than that. 8-900 x2 on the inspection cover. could pull the pan and look for a name plate on the VB or take it to a shop and see what the line pressures are.