gov springs?
 

can your gov springs brake or slip? i was driving and the pedal went dead and i thought the linkage broke but its not and i pulled on the throttle and nothing happend!!! :scare2: so is it the gov springs or what? need help fast.... please

Does it still run?

I have seen the stud pull out that the governor springs run on
does it have higher rpm gov. springs then stock?

Re: gov springs?
 

Send it to a pump shop

http://www.vwdiesel.net/picserv/redrotors/841_G.jpg
this might help out a bit on understanding the workings a little more

its a stock spring just tightened 2 clicks or so. so pull the pump and send it to some one is my best bet?

Re: gov springs?
 

If there is no externally visible problems such as linkage bind or slip, I would recommend sending it to the pump shop. There is very little in these pumps that could or should be repaired by the do it yourself'er. Not to mention it would be a great time for pump mods!

fixed it! it was the linkage at the bottom that came off.

Re: gov springs?
 

If it will pop off easily you might want to replace the ball and receiver . Even more so with a auto truck, the slight movement in the linkage can make getting the tps a little frustrating

the ball didnt pop off. it was still on there. it unscrewed itself some kinda way