A couple things puzzle me here. Valair doesn't make an Organic/Feramic clutch, but SouthBend does and there rated around 450hp & 900ft.lbs. He doesn't say he has a Ceramic clutch, as someone else stated. If it a Valair, to be rated at 500hp & 1000lb. Ft it would be a full Ceramic/Kevlar clutch, which is what I have. You'd have to have one hell of a motor to make this clutch slip. I didn't find any Feramic clutch disc on Valairs site. And an Organic disc is stock stuff, not something you'd use for a built motor. And you wouldn't make a disc with stock organic type lining on one side, and ceramic on the other. Get your facts straight and tell use about your truck (what is really has right now).
|
Valair Part# NMU70279-02 HD Organic/Feramic 500hp/1000tq NV5600
Valair Part# NMU70279-03 HD Feramic/Feramic 550hp/1050tq NV5600 These kits are also available for the 5spds as well as 5spds converting to a 13" Clutch. Luke |
you have a 500cc 12mm ppump and 5x.012 injectors and 18* of timing with a 57/65/?? super b? I bet your egt's are sky high. get a dual disk 3600 6 button with the 1 3/8 input shaft and a bigger turbo like a 64 mm and have some fun:U:
|
I just had a 450 hp 1000 torque ceramic/metallic from southbend installed . I was shocked when it slipped more than the oem clutch with 225000 miles on it . I did not know about a break in period,but it has been suggested that it might take some time to seat in . Sounds weird to me . I just had edge jammer 100 hp nozzles installed and I want to stomp it
|
All times are GMT -5. The time now is 06:16 PM. |
© 2024 MH Sub I, LLC dba Internet Brands