3rd Gen Mirrors On A 97
 

my friend is looking for the newer tow mirrors off of the 3rd gen dodges and is puting them on a 97 who makes them and were can i get them that will fit on his truck or will the ones off the new dodges bolt on
Thanks

they wont bolt on, the plastic "triangle" is WAY to big, we tried to do it on my buddies 97 when we put tow mirrors on another friends 03......

i have seen a few older dodges with them on so i know it can be done but was not shure if they bolted on or some company makes them.

i am sure the factory ones wont, there might be a company that makes them, you could shave the newer ones down.......

ok thanks i will look around we might just have to trim factory ones

In order for the 03+ mirrors to work on a 02 or older trucks you have to swap the bases (triangle part). The only benefit to this is to get the power/heated functions. Requires 2 sets of mirrors; 03+ power/heated set and 02 non power set.

You can order a set of non power mirrors from DC that bolt right upto the 2nd gen's, just order em for an 02 dodge 3/4 or 1 ton. These are what I have on my truck currently, I do plan to upgrade to the power/heated versions once I can find a drivers side mirror for cheap.

thanks what is DC is that a website

Daimler Chrysler - owns Dodge

I think they run $250 a set for the non powered ones......been awhile since I priced a set so that might have changed. The power/heated set were around $320.

ok thanks i found some on ebay i was not shure if DC was a site sponsor
thanks

01 and 02 had the tow mirrors that will be a bolt on your friends 97 BUT they are NON power NON heat..... In order to have power/heat tow mirrors you'll need the 2nd gen and 3rd gen mirrors then do the swap of the heads.

Ian

do you need the wiring for the power an heat or will the 97 already have it

depends on if the 97 has it on the truck currently... If he really wants the power mirrors he doesnt have to hook up a wire for the heat. IIRC the heated mirror came out in 1998. IF your buddy does the 3rd gen/2nd gen mirror swap he will have to come up with connectors for the power mirrors as the plug-ins are not the same. If he just wants the mirror the 2nd gen tow mirrors will work (non heat or power) they are 3 10MM nuts behind the door pannel (you dont have to take the pannel off just unscrew the top phillips screw and pull back a little. (same mounts for the tow mirrors but some come with a metal bracket to sturdy the mounting spot)

Ian

ok thanks

ya I have a set of non heated on my 97 and my 02... I love them

yah i have 3rd gen towing mirrors on my 97 and my dads 95 and you just go to the dealership and order 3rd gen towing mirrors just be sure to tell them that they need to be for a 2nd gen, they bolt right up and should take 30mins to 1hr to install.
http://i27.photobucket.com/albums/c1...ktowmirror.jpg
there 260 a set for the manual tow mirrors not too bad imo

Has anyone used these?
Thoughts, feelings, concerns?

1994-1997 Dodge Ram 1500 2500 Power Towing Mirrors Pair | eBay

97
veggiescout.org

1997 Dodge Ram 2500 Truck Mirror POWER Towing UPGRADE PAIR at 1AAuto.com.

You'll also need the support brackets running these big mirrors.
1997 Dodge Ram 2500 Truck Tow Mirror Support Bracket at 1AAuto.com.

Are those any different than the ones on ebay?

Do either of them shake?

I know I need the brackets.

veggiescout.org

Yes theyre the same as the ones on ebay. just make sure you get the right years. the 98.5 - 02 2nd gens will bolt up but the wire harness plug is different than the earlier 2nd gens. The mirrors will shake no matter what if the support brackets are not installed with it. With the support brackets, youll have no problem.

If your looking for manual/non heated mirrors go to Dodge Ram 3500 Truck Mirrors at 1AAuto.com.
There like 174 dollars plus you'll need to get the support brackets.

Diesel Performance Parts Power Chips Diesel Exhaust Intake Performance Products has some that are for the 2nd gens. Powered or non power that have either one.:tu: