Turbo ID help
3 Attachment(s)
My buddy got this for $50. some kid bolted it on his 24 valve and couldn't build boost.
Yes, it did have the actuator on it, I robbed it for my 35 thats on my truck right now. I believe its 62/80. Does it suck? What downpipe do I need? Thanks guys Attachment 47611 Attachment 47612 http://i15.photobucket.com/albums/a3...5-05134910.jpg Attachment 47613 |
looks big, and very good deal:tu: i cant tell you any thing about it tho, is there numbers on it anywhere
|
I couldnt tell ya what it is either, but looks like a great deal to me! good luck in finding out what it is!
|
it looks like where it would have holset on the compressor housing it was ground down, and there's no data plate anywhere.
---AutoMerged DoublePost--- bump. I need to know fairly soon whether I can run this or not. |
80mm inducer or exducer on the exhaust? What is the exducer on the compressor?
|
i believe its an 80mm exhaust wheel. Sorry I'm turbo retarded.
|
With having that big of an exhaust wheel it will probably be fairly laggy.
|
Alright I guess I'll bolt it on, put a piece of 4" pipe behind it, and if it spools buy a downpipe and call it the big mystery turbo :scare2:
|
Looks like a HX40/18....
How many blades are on the compressor wheel?. |
that exhausting housing looks way bigger than any 18cm housing ive seen, it looks like it may be a hx60 exhaust housing or maybe bigger, there is a hx 55 on ebay right now and the housing look similar
|
All times are GMT -5. The time now is 08:17 AM. |
© 2024 MH Sub I, LLC dba Internet Brands