![]() |
:bat:
|
If I could find a bigger turbo I would sell you mine but I am still fighting what to get...:argh:
|
Originally Posted by guhfluh
(Post 538662)
It's very cheap to rebuild a holset. Not too hard either. As long as the wheels and shaft is good, you should be ok.
What's the oil "issue"?
Originally Posted by 1999 Sport Cummins
(Post 538668)
i know where a hx 35 and a exaust manifold is for $200 they come together.. if you want it let me know but i want the exaust manifold if thats cool
Originally Posted by tltruckparts
(Post 538684)
first off a 472 isnt even close to your hx35 and if you go with an hx40 your going to need a new downpipe as well. jsut stick with an hx35 for now
Originally Posted by 12valvetater
(Post 538728)
:bat:
Originally Posted by j_k_auto
(Post 538738)
If I could find a bigger turbo I would sell you mine but I am still fighting what to get...:argh:
|
What front cover did all the oil blow out of? Hopefully it was the turbo front cover you're talking about and you didn't hurt anything else by running it dry.
|
The previous owner, once upon a time, must have had a bolt or kdp fall out. It cracked the front cover. Prev owner tried putting gasket maker on it, gasket maker deteriorated. My front cover was spraying oil at a pretty good rate. It just happen to run dry on my way to the diesel shop (I was being stupid. Usually I keep diesel oil at all times in my bed)
|
All times are GMT -5. The time now is 03:09 PM. |
© 2024 MH Sub I, LLC dba Internet Brands