wastegate
 

still running the stock wh1c turbo. ive heard a lot about blocking the wastegate? what is this? hows it done? and what can be gained?

stock waste gate opens at 19.6 psi, you can use a boost elbow or just crimp the line to whe waste gate, this will allow you to get 25-30 psi

just becareful for drive pressure if you crimp the line off
you can blow head gaskets that way

just watch the boost gage, dont let it go over 35,, i would put a boost elbow in so you can kinda controll it

who sells a good boost elbow?

Hey man Industrial Injection sales the boost elbow pretty cheap. Got one on my brothers '98 12v. about 30-33lbs is where i'd set it. I pushed 38lbs outta my stock hx35 for about 6 months then it siezed up completely. Lol. Just some friendly info for ya. :tu:

ask our sponsors here. i got mine for 20 bucks shipped and it was here within 2 days. all it is is a 90* fitting eith an allen head in it

ordered one...tst boost elbow:w2:

I found a listing for one on Ebay for 19 dollars with free shipping.

Adjustable Boost Elbow ---Dodge Cummins Turbo hx35 hx40 : eBay Motors (item 300394038373 end time Apr-06-10 11:23:13 PDT)

you can set your waste-gate to a higher setting.