removing the fuel plate.
when you remove the fuel plate wht do you do with the rod inside? to do all i would do is remove the afc take out the plate and put the housing back on? thanks in advance.:c:
---AutoMerged DoublePost--- lso is removing the plate bad for the pump? some places i read it is some places i read it is not. |
it will not hurt the pump to run plateless. to run plate less you just remove the fuel plate and put nothing in its place. If I were you I would leave the afc in there and tune it ( it makes driveing so much easyer).
|
Originally Posted by 94 12valve
(Post 412662)
it will not hurt the pump to run plateless. to run plate less you just remove the fuel plate and put nothing in its place. If I were you I would leave the afc in there and tune it ( it makes driveing so much easyer).
|
setting the amount of boost you need to see before you get full fuel
|
How do you do this?
|
play with the boost screw on the back of the afc. then play with the star wheel, turn it toward the front of the motor. flip the washers to allow more rack travel. that's what i did, but it took awhile to get it the way i wanted.
|
All times are GMT -5. The time now is 05:54 PM. |
© 2024 MH Sub I, LLC dba Internet Brands