Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   5.9L 12V Performance (https://www.dieselbombers.com/5-9l-12v-performance/)
-   -   black smoke!!!!!!!!!!!!!! (https://www.dieselbombers.com/5-9l-12v-performance/19879-black-smoke.html)

smokedout 12-21-2008 01:26 AM

black smoke!!!!!!!!!!!!!!
 
I need more smoke any ideas?:humm:

DB Admin 12-21-2008 01:27 AM

Injectors and DV's

94cummins12v 12-21-2008 01:31 AM

lots of fuel

cummins24 12-21-2008 10:05 AM

Wrap a towel over the air filter :lol88:

Diesel Dave 2 12-21-2008 11:34 AM

Do the AFC adjustments all forward and and smoke will roll...Need more...Yes injectors and DV...Then turbo time because EGT will start to get crazy...

SmokinPiney 12-21-2008 12:35 PM

A stock plate full forward will not smoke all that much. Swap out that stocker for a #5 or better and you'll be chuggin in no time

94cummins12v 12-21-2008 12:56 PM

#5 was a good one for me then i went with a 0 make a little bit of difference but i have alot of upgrades that roll the coal

smokedout 12-21-2008 02:03 PM

whats the best plate for the most smoke?

xzaq103 12-21-2008 02:11 PM


Originally Posted by smokedout (Post 256783)
whats the best plate for the most smoke?

#0 or #100

Honestly why do you want it to smoke? Its gonna be hot but id say a good smoke setup would be 370s LCDVs and a gutted AFC.

In your situation I would grind the plate to a #100 and gut the AFC For smoke or Just Put the start wheel as loose as you can get it. This should give you plenty of smoke.

I dont see gauges in your sig do you have any?:humm:

---AutoMerged DoublePost---


Originally Posted by cummins24 (Post 256675)
Wrap a towel over the air filter :lol88:

This would work as well but im not sure it would start.... :humm:

jasonw 12-21-2008 05:09 PM

Remove your turbo. Then when your pistons weld themselves to the block, take some pictures. I'd like to see the damage.


All times are GMT -5. The time now is 06:43 AM.


© 2024 MH Sub I, LLC dba Internet Brands