Diesel Bombers

Diesel Bombers (https://www.dieselbombers.com/)
-   5.9L 12V Performance (https://www.dieselbombers.com/5-9l-12v-performance/)
-   -   BHAF (https://www.dieselbombers.com/5-9l-12v-performance/15934-bhaf.html)

Dieselsmokin 09-01-2008 08:27 AM

BHAF
 
I've been reading this site for a few months (in the background for the most part) and i have learned a great deal of valuable info from the the people that ask questions and give feedback on here and i have a question to throw out there. If BHAF= Big Honkin Air Filter then what exactly is this? Is it a certain type of air filter? Or is there a specific part number? i have the Banks stinger plus on my truck and very much wish i would've listened to you guys and did my own fuel plate and the rest of the free (cheaper) mods.
Well from reading the info on here i decided to mess with it a little bit and slid the AFC and the (banks ) fuel plate full forward (fuel plate minus 1/16th) and gained additional power from doing this but of course EGT's went up not anything crazy but they did go up. Will changing this Banks air filter to the BHAF do me any good with the higher EGT's. Any help appreciated!:humm:

stkdram55 09-01-2008 08:51 AM

yes this will help you with EGT's, here is a previous post that talks about it, scroll down thru the first part of it and DM has all the part numbers for the BHAF at different sellers


https://www.dieselbombers.com/5-9l-1...ncer-ring.html

slowtowpig 09-01-2008 09:26 AM

i had the normal paper bhaf and tossed it in the trash. i went out and found a K&N that was the same size and my egt's dropped about 50*, oh and it was cheaper.
heres the link and part number for you.
E-1796 - K&N Replacement Filters, Replacement Air Filter

stkdram55 09-01-2008 09:30 AM

will that work with on a Cummins??? Not sure but i think our stock air intake tubes are 4" and that said it was like 3-3/4" i think:humm:

rubberfish 09-01-2008 10:08 AM


Originally Posted by slowtowpig (Post 203100)
oh and it was cheaper.

I found that too. I run an aFe filter and it was about fifteen
bucks more than a BHAF and I don't have to throw it away.
So I saved money the first time it got dirty, 'cause I washed it. :)
I did have to buy an adapter to step down from 5" to 4".
I didn't notice any egt difference though, just more whistle. :choochoo:

slowtowpig 09-01-2008 11:01 AM

1 Attachment(s)

Originally Posted by stkdram55 (Post 203103)
will that work with on a Cummins??? Not sure but i think our stock air intake tubes are 4" and that said it was like 3-3/4" i think:humm:

correct, it fits 4in. mine is 4in also.

Attachment 56482

stkdram55 09-01-2008 11:02 AM

ok just wanderin:U:

2500HeavyDuty 09-01-2008 11:02 AM


Originally Posted by slowtowpig (Post 203142)
correct, it fits 4in. mine is 4in also.

http://i32.photobucket.com/albums/d1...des/006-11.jpg

no interooler on there?

stkdram55 09-01-2008 11:06 AM

nope no intercoolers on the early strokers they didnt start that til 99

2500HeavyDuty 09-01-2008 11:10 AM

:humm:


All times are GMT -5. The time now is 02:31 PM.


© 2024 MH Sub I, LLC dba Internet Brands